Specific operation :
Audio Meter Mode:
Normal mode:
1. Single Click
OK ----- Bottom line display or no in UV meter mode
UP ----- Mode Change
Down ----- Mode Change
2. Longe Press Button
OK ------ 3 seconds to enter setting mode
UP ------ Brightness increase
Down ------ Brightness increase
3. Double Click
OK ----- Effect Mode change(3Effects)
UP ----- Switching display effect selected mode
Down ----- Switching display effect selected mode
4. Three Click
OK -- Menu effect switch, right -left transition / up - down transition / mid folding open
5.Four Click
OK - Switch from VU Meter mode to Spectrum mode
6. Five Click
OK - Enter the clock mode.
7.Six Click
OK - Clock enable or disable. No longer display clock after disable
8.Seven Click
OK - Close the display, enter the standby mode, and any key will return to normal mode.
Speed Setting Mode : (in normal mode,press the button for 2 seconds to enter,press the button for 2 seconds to exit.)
OK -
1.The rising speed of the light bar(15 optional)
2.The falling speed of the light bar (15 optional)
3.The holding time of the peak (15 optional)
4.The falling speed of the peak (15 optional)
Loop in these functions
UP - Time increases Speed decreases
Down - Time decrease Speed increases
Audio spectrum Mode:
Normal Mode:
1.Single Click
OK - Bottom line display or no in spectrum mode.
UP - Mode Change
Down - Mode Change
2. Longe Press Button
OK - 3 seconds to enter setting mode
UP - Brightness increase
Down - Brightness increase
3. Double-Click
OK - Switching real /smooth I/smooth II output
UP - Switching 71 segments /36 segments /23 segments.
Down - Switching 71 segments /36 segments /23 segments.
4. Three Click
OK - Menu effect switch, right -left transition / up - down transition / mid folding open
5.Four Click
OK - Switch from Spectrum mode to VU Meter mode
6. Five Click
OK - Enter the clock mode.
7.Six Click
OK - Clock enable or disable. No longer display clock after disable
8.Seven - Click
OK - Close the display, enter the standby mode, and any key will return to normal mode.
Speed Setting Mode : (in normal mode,press the button for 2 seconds to enter,press the button for 2 seconds to exit.)
OK -
1.The falling speed of the light bar (15 optional)
2.The holding time of the peak (15 optional)
3.The falling speed of the peak (15 optional)
4.Output selection (Real output / smooth I output/ smooth II output)
Loop in these functions.
UP - Time increases Speed decreases
Down - Time decrease Speed increases
Clock Mode: Cycle display time / date / week
Clock Display Mode:
1.Single Click
OK - Exit the clock display state.
UP - Cyclic display time - date - week - time
Down - Cyclic display time - week - date - time
2.Long Press Button
OK - In the clock display status, press 2 seconds, enter the Clock Setting Mode.
UP - Clock Brightness increase.,After the highest brightness, the increase of one level is the brightness auto mode (the brightness of two different time periods can be set).
Down - Clock Brightness reduction.
Clock Setting Mode : (In normal mode,press the button for 5 seconds to enter,press the button for 2 seconds to exit).
1.Single Click
OK - Switching hours / min / sec / year / month / day/date mode
UP - Hours / minutes / sec / year / month / day increase.
Down - Hours / min / sec / year / month / day decrease.
Date Mode: YY-MM-DD/MM-DD-YY/DD-MM-YY
(In the auto mode of clock brightness, there will be more than 4 setting items, starting time, ending time, brightness in time period, and brightness outside the time interval, for example, setting 23 to 06 brightness level 2, and other time periods brightness level 10.)
Other Function Operation:
Self Check Function:
UP +OK+ DOWN - 2 Seconds Press (OK 2 Seconds exit)
Factory Default :
OK - 10 Seconds
Note:
(VFD)Vacuum fluorescent display Is the display tube and from the vacuum electronics development, the electrons emitted by the cathode (direct heating type, referred to as filament) and accelerate the control gate, the flow of electrons on the glass substrate printed on the electrode and the phosphor anode and grid and a glass lid. It uses electronic impact phosphor to make phosphor glow, it is a kind of self luminous display device
Because of the working conditions of VFD, there is a DC high voltage of about 54V, so don't touch the VFD pins when it is working
Because of the characteristics of VFD, long working brightness will be attenuated, so it will become uneven, is a normal phenomenon
Package Included:
1 x Audio Music Spectrum
1 x Remote Control
1 x USB Cable
