1Pc 315MHz/433MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver

Spedizione da magazzino Europeo

nessuna tassa doganale è richiesta per le spedizioni nel mercato UE

Country:

Metodo di spedizione: Italy

Magazzino : Italy

Italy: Metodo di spedizione
Shipping Direct mail 1-3 weeks (Tracked) EUR 4,50

Cod.: BG-1413071

€6,23

Metodo di spedizione

Questo prodotto ha una quantità minima di 8

Quantità:

i h

Specification:

1. Input Voltage: AC85V-AC220V
2. RF Frequency: 315/433MHZ
3. RF Working mode:Super heterodyne receiver
4. Receiver Sensitivity: -107dBm
5. Remote Control Distance: >100 meter(In open environment)
6. Decoding Way: MCU Software decoding
7. Can store the number of remote control:32
8. Support remote control type: Fixed code, learning code
9. Channel: 1CH
10 .Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
11. Wiring Method:Fixed wiring terminal
12. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC
13. Dimension:5.4cm*3.1cm*1.4cm

Working/output method:

1. Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons
    remote control.
2. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one
    buttons remote control.
3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

Clear & Learn Code:

1. Clear function - After pressing the "KEY" button 8 times, the LED will go off and release all the remote control data in the memory. When the LED
    flashes for 5 times, it indicates that the clear function is completed.
2. learning function - click the learning button "KEY", LED indicator light indicates that the microprocessor to enter the learning state of the code,
    press the matching wireless remote control button, LED light blinks 3 times then turn off means Code success.
3. LED flashes to determine the selected function.
   * Flashing 1 time - Jogging function
* Flashing 2 times - Self-locking function
   * Blink 3 times - Interlock function

Note:

When using for the first time, make sure to clear the factory code and clear the remote control code.

Package included:

1 x 220V 1 Channel Wireless Relay Switch

Etichetta del prodotto

Wireless (770)
,
Remote (329)
,
Control (534)
,
1pc (23)
,
Switch (583)
,
10A (82)
,
Relay (204)
,
Receiver (279)
,
Channel (274)
,
220V (100)
,
1CH (33)
,
315Mhz/433Mhz (4)

1Pc 315MHz/433MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver

Payment options