Cerca
Euro
Italian

RGT EX86010CJ 1/10 2.4G 4WD Crawler Climbing Truck Waterproof RC Car Vehicle Models

Venditore: Serier Electronics

Spedizione da magazzino Europeo

nessuna tassa doganale è richiesta per le spedizioni nel mercato UE




Cod.: BG-1598296
€364,61




i h
*
RGT EX86010CJ 1/10 2.4G 4WD Crawler Climbing Truck Waterproof RC Car Vehicle Models
Description:
Basic informationBrand:RGT
Scale:1/10
Model:EX86010-CJ
Speed:15km/H
Power systemESC:brush RGT-60 waterproof
Motor:550 17T
Servo:15kg 
waterproof
TransmitterFrequency:2.4 GHZ
Battery: 4XAA battery(not included)
Battery:7.2V 2000mAH
othersCharge time:3H
Using time:15-20min
Control distance:80m
Function:forward,backward,left,right
Proportional control:proportional control
DimensionSize:50X23X26cm
Wheelbase:28.5Cm
Chassis height:8Cm

Gear ratio:56.6:1 — 33.3:1
Weight:2.78KG

Feature:
EX86010-CJ, 1/10 all-terrain four-wheel driver ealistic off-road vehicle,is the vehicle that RGT team intend to launch this time.
 
The CJ optimize and shorten the wheelbase on the (EX86110) platform,with the chassis structure basically unchanged.The CJ wheelbase is adjusted to 285mm,and the front bumper adopts metal anti-crash design.The winch mounting hole is reserved,which could realize the non-destructive installation.There are part of CJ is equipped with a full-size spare tire. The whole car employ ball bearings, C-shaped steel beam chassis,and front and rear axle locking spools. The steering arm is designed with a high-position tie rod, which is matched with CVA steering of a high-strength ball cage,and can achieve a super-large steering angle of 41 degrees.Later on,an aluminum alloy upgrade steering arm with a 45-degree steering angle will be introduced by the factory.The CJ have the motor front-mounted design,and split transmission and deceleration system.The main gear of the reducer comes with the slipper design, and the gears of the transmission system are all high-strength powder alloy gears,which solve the problem of tooth sweeping under the condition of super-strong resistance load. CJ is still in RTR version for the players,equippedwith17TRC550 super-strong torque motor,RGT-60A waterproof ESC,15KG high-torque waterproof servo,and 7.2V 2000MAH NiMH battery.The 4-channel remote controller is specially designed for Crawler,supporting the third channel control the light switch, and the forth channel control the winch retracting function.The biggest high light of CJ is that the approach angle and the departure angle are nearly 90degrees,not afraid of any road conditions.The design of the body shell is full of carefulness and attentiveness,as the simulated steering wheel,the seat,the handbrake, the windshield and the rear-view mirror are all available.
 
 
Such a beautiful CJ must be a perfect off-road vehicle,which could be appreciated when rest, and traverse when operation.
 
The newly designed steering arm uses a high-level tie rod for steering, avoiding the limit of Block C, and can achieve a super steering angle of 41 degrees with great CVA part.
 
The design of split transmission and deceleration drive system, more stable low-speed torque output.
 
Reducer with slipper Main gear, metal transmission gear, metal split transmission box gears
anti-dropping ball cage CVA, made by 45# steel, durable and in anti-dropping design.
 
The chassis design is simple and clear, pursuing the rationality and convenience. To provide more practical and convenient for player, the wiring slot on the ESC installation Box and the Receiver Box are very special and easy for the player to add light lines and winch lines in future.
 
 
CJ body shell,made of imported PC material and molded by injection process,is very bright and have strong resistance feature.The blister process is also used for the plastic steering wheel,the seat,the hand brake.The rear-view mirror are exquisitely made.The transparent PC windshield shows very good simulation effect.

Package included:
1*RC Car
1*Controller
1*Rechargeable battery(built-in)
1*Charger



































Etichetta del prodotto